FP Logo.png





Only FREE DROP TOP® can offer you a Plastic Waste Receptacle with these DROPAMATIC® TOP features:

  • The DROPAMATIC® lid automatically opens and closes when 3/4 of an ounce or more is placed on top. It also continues the opening motion once it has begun, so when a person is throwing away a used hand towel and gently pressing down to put the paper into the can, the motion is continued by the counterbalanced flaps. This prevents overflow from swing lids getting stuck in the vertical position and replaces push lids which trap the trash half way causing spills down the outside of the container. The design also reduces the capability of someone just piling the trash on top of the lid. The DROPAMATIC® reduces the time needed to clean up a container and the area around it.
  • The lid flaps swing into the lid area only and does not swing into the container thus allowing for full use of the base's capacity. The center axle swing lid, which many are accustomed to seeing, actually swings into the container thus reducing the containers capacity from 23 gallons to almost 19 gallons. The flaps are permanently set in place. They cannot be removed by employees, unlike other lids on the market.
  • The flaps have a full 1-inch clearance from the wall of the container thus allowing for free movement when an oversized polyliner is used. The other style of swing lid, as well as the step-on containers, is rendered useless when an oversized polyliner is placed in the container.
  • Will fit Rubbermaid's #3568 and 3569 bases.

Shown below are our lids for both the 35 Gallon and 55 Gallon Receptacles.

These lids are made from rotationally molded polyethylene. We treat the polyethylene with additives to protect from any ultraviolet distortion. Lids are available in black, brown, blue, red, and gray. For the 35 gallon receptacle, we offer a flat top lid and a hood style lid. The 55 gallon receptacle has a flat top lid and a dome style lid.

Both the 35 and the 55 gallon receptacle lids are designed with a unique locking feature that keeps them from blowing off of the can. The lid "snaps" over the edge of the receptacle and has an indented handle to make it easy to lift off and put back on. The swing doors are attached with heavy-duty rivets to withstand years of daily use and to prevent separation.

We have patented capability to put your logo into each side of the hood. This is not a silk screen or a decal; it will not rub off. The decal is molded in during the manufacturing process so the logo is there to stay. We stock many of the leading franchise logos and we can manufacture your custom lids for orders of 50 lids or more.

The Conastoga lid is a dual-opening hood top. It fits the 55 gallon round receptacles.


Printer Friendly Format Printer Friendly Format    Send to a Friend Send to a Friend

 © 2008-2023, Facility Products, LLC.. All rights reserved.